Product catelogue
Networking, wireless, power, print and storage hardware held in Jebel Ali Free Zone and shipped across the UAE and wider region.
Product introduction: ROCKETM2: 2.4GHz Hi Power 2x2 MIMO AirMax TDMA BaseStation True Carrier Class Network Performance. Scalability: 300+ subs per secored base station Latency: Latency remains low for voice and video applications as network scales Speed: 150MBps+ PtMP performance Range: 50km+ outdoor range. POE power supply injector included.US style plug. USA / Canada frequency version. Antenna sold separately. Note: Set to 20MHz width and disable Airmax to allow use with standard 802.11n devices. Product Highlights: Plug-and-Play IntegrationairMAX TechnologyairOSairControl Product key features: MIPS 74Kc Processor128MB SDRAM/8MB Flash Memory2402 - 2462 MHz Operating Frequency27 dBm Output Power1x 10/100 Mb/s PortairOS 5 Advanced Operating SystemairView and airControlairMAX TDMA TechnologyPlug & Play Integration with airMAXFrequency and Channel Flexibility. Download More Details
View Product
Product introduction: The RD-5G34 RocketDish AirMax 2x2 PtP Bridge Dish Antenna from Ubiquiti Networks features a gain of 34 dBi that helps create a Point-to-Point (PtP) bridge for networking applications when paired with an optional Rocket M BaseStation. It delivers dual-polarity performance and operates in the 5 GHz frequency, which works well for long-distance links. Furthermore, it comes with a shroud, Rocket mount, and pole-mounting support. Product Highlights: Frequency: 4.9 - 5.8 GHz, Gain: 30 - 34 dBi, Radome: RAD-RD3, Wind Survivability: 200 km/h (125 mph), Mounting: Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors IncludedThe RocketDish antenna delivers 2x2, dual-polarity performance.Powerful Performance for Long-Range LinksRobust Design and Construction for Outdoor UseSeamless Integration with Rocket Radios Product key features: 5 GHz Operating Frequency34 dBi GainBuilt-In Rocket MountProtective ShroudFor Outdoor UseCompatible with Rocket M BaseStation. Download More Details
View Product
Product introduction: The RD-5G30 RocketDish AirMax 2x2 PtP Bridge Dish Antenna from Ubiquiti Networks features a gain of 30 dBi that helps create a Point-to-Point (PtP) bridge for networking applications when paired with an optional Rocket M BaseStation. It delivers dual-polarity performance and operates in the 5 GHz frequency, which works well for long-distance links. Furthermore, it comes with a shroud, Rocket mount, and pole-mounting support. Product Highlights: Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated timeslots scheduled by an intelligent AP controllerEliminates hidden node collisions and maximizes airtime efficiencyProvides scalability, high throughput, and low latency in unlicensed multipoint networksIntelligent QoS: Priority is given to voice/video for seamless streamingSupports high-speed, carrier-class linksRocket M GPS units seamlessly integrate with AirMax RocketDish Antennas to enable you to utilize Ubiquiti AirSync GPS Synchronization technologyAirSync technology enhances the hardware and software of Rocket M to use GPS signals for precision timingGPS Signal Reporting: Easily manage/monitor GPS satellite signals using AirOS software (not included)No Co-Location Interference: Synchronized transmission among Rocket M GPS-powered BaseStations (available separately) effectively eliminates co-location interferenceChannel Re-Use: Frequency reuse for increased scalability Product key features: 5 GHz Operating Frequency30 dBi GainBuilt-In Rocket MountProtective ShroudFor Outdoor UseCompatible with Rocket M BaseStation. Download More Details
View Product
Product introduction: Designed to mount and interface with the Ubiquiti Networks RocketDish, the R5AC-LITE rocket ac airMAX ac BaseStation from Ubiquiti Networks uses airMAX ac technology to provide up to 450 Mbps throughput. With an outdoor UV stabilized plastic enclosure this BaseStation can be installed in some of the harshest conditions allowing for the data signal to reach greater distances. Inside the enclosure you will find a 720 MHz Atheros MIPS 74Kc processor complete with 128MB of DDR2 RAM and 16MB of NOR Flash memory for enhanced processing power to allow for a stronger, more stable signal. Ports on the BaseStation include one Gigabit Ethernet port and two waterproof RP-SMA RF connections to prevent water damage. The BaseStation is capable of operating in both Access Point, and Station modes allowing you to configure it to suit a variety of networking needs. Integrated QoS functionality allocates network resources to provide enhanced streaming of data while the airMAX engine with custom IC improves TDMA latency. Improved TDMA latency greatly increases data throughput and provides enhanced network speeds. Product Highlights: Intelligent QoS Priority assigned to voice/video for seamless streaming.Scalability High capacity and scalability.Enhanced Performance The enhanced airMAX ac technology boosts the advantages of the TDMA protocol. Ubiquiti's airMAX engine features a custom IC to dramatically improve TDMA latency and network scalability. The custom silicone provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.airMAX ac supports high data rates, which require dense modulation: 256QAM - a significant increase from 64QAM, which is used in airMAX. With their use of proprietary airMAX ac technology, this airMAX ac product supports up to 450+ Mbps real TCP/IP throughput - up to triple the throughput of standard airMAX products.The 5 GHz radio band is free to use, worldwide, offers plentiful spectrum, and works well for long-distance links. Product key features: Outdoor UV Stabilized Plastic Enclosure720 MHz Atheros MIPS 74Kc Processor128MB DDR2 SDRAM / 16MB NOR Flash Memory1 x 10/100/1000 Mbps Network Interface2 x RP-SMA Waterproof RF ConnectionsIntegrated Power, Ethernet, Signal LEDsIntelligent QoSHigh Capacity & ScalabilityHigh-Speed, Carrier-Class LinksairMAX ac Technology. Download More Details
View Product
Product introduction: The POE-24-AF5X PoE Injector from Ubiquiti Networks is designed for BaseStation equipment. This 24 VDC 24W adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current. Product Highlights: Surge protectionClamping protectionMaximum surge dischargePeak pulse currentAC cable with earth ground Product key features: 24 VDC @ 1.0 A Output Voltage90 to 260 VAC @ 47/63 Hz Input VoltageGigabit LAN PortRemote Reset Capability. Download More Details
View Product
Product introduction: The POE-24-24W-G 24V PoE 1A Gigabit Adapter from Ubiquiti Networks has features like surge protection, clamping protection, maximum surge discharge, and peak pulse current to help protect your Ubiquiti PoE devices. It also includes an AC cable with earth ground. ESD attacks are the leading cause for device failures. You can effectively protect against ESD attacks using this grounded PoE adapter. This PoE adapter is compatible with most Ubiquiti PoE devices, including airFiber, airMAX, airVision, UniFi, and mFi. Product Highlights: Brand : Ubiquiti NetworksHardware Interface : EthernetItem Dimensions : LxWxH 2 x 3.5 x 1.3 inchesData Link : Protocol EthernetItem Weight : 159 Grams Product key features: 1 x Gigabit LAN/1 x PoE PortRemote Reset CapabilityReset ButtonPower Indicator80+% Efficiency65 kHz Switching FrequencyIEC-320 C6 AC Connector. Download More Details
View Product
Product introduction: Power over Ethernet or PoE describes any of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras. Unlike standards such as Universal Serial Bus which also power devices over the data cables, PoE allows long cable lengths. Power may be carried on the same conductors as the data, or it may be carried on dedicated conductors in the same cable. There are several common techniques for transmitting power over Ethernet cabling. Two of them have been standardized by IEEE 802.3. Since only two of the four pairs are needed for 10BASE-T or 100BASE-TX, power may be transmitted on the unused conductors of a cable. In the IEEE standards, this is referred to as Alternative B. Power may also be transmitted on the data conductors by applying a common-mode voltage to each pair. Because twisted-pair Ethernet uses differential signalling, this does not interfere with data transmission. The common mode voltage is easily extracted using the center tap of the standard Ethernet pulse transformer. This is similar to the phantom power technique commonly used for powering audio microphones. In the IEEE standards, this is referred to as Alternative A. In addition to standardizing existing practice for spare-pair and common-mode data pair power transmission, the IEEE PoE standards provide for signalling between the power source equipment (PSE) and powered device (PD). This signaling allows the presence of a conformant device to be detected by the power source, and allows the device and source to negotiate the amount of power required or available. Up to a theoretical 51 watts is available for a device, depending on the version of the standard in use and the vendor of the hardware. Product Highlights: Brand : UbiquitiHardware Interface : EthernetProduct Dimensions : 7 x 8.8 x 3.3 cm; 135 GramsData Link Protocol : IEEE 802.3, Ethernet Product key features: The IEEE standard for PoE requires category 5 cable or higher for high power levels, but can operate with category 3 cable if less power is required.[1] Power is supplied in common mode over two or more of the differential pairs of wires found in the Ethernet cables and comes from a power supply within a PoE-enabled networking device such as an Ethernet switch or can be injected into a cable run with a midspan power supply.This POE is 24V DC and works only with Ubiquiti wireless devices and nothing else.This device cannot be used with any POE cameraWe have supplied many for maintenance workWarranty not applicable for this product. Download More Details
View Product
Product introduction: Power over Ethernet Adapters Device Protection PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events Product Highlights: Provides Earth grounding and Surge protectionHelps protect against ESD attacksPowers ubiquiti PoE devicesCountry Of Origin : China Product key features: Brand : Ubiquiti NetworksHardware Interface : EthernetColor : BlackItem Dimensions : LxWxH 03 x 0.03 x 0.03 inchesItem Weight : 22 Pounds Download More Details
View Product
Product introduction: The 24V PoE Adapter with Gigabit LAN Port from Ubiquiti Networks powers a variety of Ubiquiti PoE devices belonging to the airFiber, airMAX, airVision, UniFi, and mFi series. This 24V adapter provides protection against surge, clamping, maximum surge discharge, peak pulse current, and ESD attacks. Product Highlights: Connector Type : RJ45Brand : UbiquitiWarranty Type : LimitedPower Plug Type : No Plug Product key features: For Ubiquiti Networks PoE Devices24V, 12W of PowerPowers Ubiquiti airFiber, airMAX, airVision, UniFi, and mFi PoE devicesProtection against surge, clamping, maximum surge discharge, peak pulse current, and ESD attacksProvides earth groundingCompatible with Ubiquiti airGateway Access PointsGigabit LAN portRemote reset capability with reset button. Download More Details
View Product
Product introduction: Integrated Radio Design Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam requires no tools for assembly; only a single wrench is required for pole-mounting. Product Highlights: Incredible Antenna “Beam” Performance The form factor of the PowerBeam features the highest gain for its size. The PowerBeam’s excellent beam directivity provides the best performance in high-noise environments.Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.The PBE-RAD-400 is a protective radome that shields the radio from the elements; it is available as an optional accessory for the PowerBeam PBE-M2-400 and PBE-M5-400. Product key features: Atheros MIPS 74Kc, 560 MHz Processor64MB DDR2, 8MB Flash Memory5725 to 5850 MHz Operating Frequency7" Dish ReflectorairMAX TechnologyIntegrated InnerFeed TechnologyairOS Firmware TechnologyairView for Advanced Spectrum AnalyzerInnovative Mechanical Design. Download More Details
View Product
Product introduction: The hAP ac² is a Dual-concurrent Access Point that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and the device supports IPsec hardware acceleration. New design allows the unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided. Product Highlights and features: Universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case)Wall anchored mounting kit is providedWifi coverage for 2.4 GHz and 5 GHz frequencies at the same time Download More Details
View Product
Product introduction: RouterBOARD cAP-2nD (ceiling Access Point) is Mikrotik first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc. cAP-2nD supports 802.11b/g/n and can be powered by PoE. It's A perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine. Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors. Product Highlights: Ceiling Access Point - RouterBoard cAPCPU: Atheros QCA9533 650 MHz Product key features: Memory: 64MB DDR SDRAMEthernet: 1x 10/100 Mbit/s Fast Ethernet portsOS: MikroTik RouterOS, Level4 license Download More Details
View Product