Product catelogue
Networking, wireless, power, print and storage hardware held in Jebel Ali Free Zone and shipped across the UAE and wider region.
Product introduction: Mellanox QSFP28 passive copper cable contains four high-speed copper pairs, Each operating at data rates of up to 25GbE. Each QSFP28 connector includes an EEPROM providing product information which can be read by the host system. Product Highlights: 2G/3G/4G/LTE miniPCI-e card with support for bands 2/4/5/12Can be used with any of our products with RouterOS and miniPCIe slot (except RB800). Product key features: LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)3G Category: R8 (Cat24 - 42.2Mbps Downlink), R7 (Cat14 - 21.1Mbps Downlink)Format: miniPCIe Download More Details
View Product
Product introduction: Featuring a powerful internal antenna, the LTU Pro 5 GHz PtMP Subscriber Station & Client Radio from Ubiquiti Networks is a Customer Premises Equipment (CPE) device that's built to work in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the BaseStation. It uses Ubiquiti's proprietary LTU technology to provide fast and reliable 802.11 Wi-Fi connections that can transfer over 600 Mb/s over the 5 GHz signal band. The LTU Pro supports both bridged and built-in NAT router modes to suit your deployment. You can also individually configure the TX and RX frequencies to avoid local interference. Made from UV stabilized plastic, the LTU Pro may be installed outdoors using the included pole mount, connecting to the client's switch or router through its Gigabit Ethernet port with the included PoE injector placed in between to provide power. Product Highlights: Reliable Connectivity - The LTU Pro PtMP CPE features a powerful internal 24 dBi antenna that delivers reliable 802.11 Wi-Fi connections to LTU Rocket BaseStations.LTU Technology - Ubiquiti's LTU technology is designed to overcome the limitations of the 802.11 Wi-Fi standard by using a custom processor and radio architecture to deliver over 600 Mb/s throughput and modulation rates of up to 4096 QAM.Independent TX & RX Configurations - The TX and RX channels may be individually configured to the 10, 20, 30, 40, and 50 MHz frequencies to avoid interference.Signal Control - The LTU Pro's target TX output power controls each station's TX output power. A PtMP network can manage signal levels to enhance network stability and wireless performance with the highest possible modulation.Auto Power Adjustments - The Auto Output Power option allows the LTU Pro to set the output power (EIRP) to the appropriate level.Pole Mount - Quickly and reliably install your LTU Pro onto a pole with the included mounting kit. With its built-in mechanical tilt, you can adjust the mounting brackets with a range of ± 15° to optimize the signal quality. Product key features: For LTU Rocket BaseStationPoint-to-MultiPoint (PtMP) DeviceCustomer Premises Equipment (CPE)Supports 802.11 Wi-Fi5 GHz (Single-Band)1 x 24 dBi Internal Antenna1 x PoE-Compliant Gigabit Ethernet PortLTU TechnologyIncludes PoE InjectorOutdoor Pole Mount Included. Download More Details
View Product
Product introduction: The RB260GS (CSS106-5G-1S) is a small SOHO switch. The RB260GS features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260G has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The devices are running an operating system designed specifically for MikroTik Switch products - SwOS. Product Highlights: The RB260GS (CSS106-5G-1S) is a small SOHO switchThe RB260GS features power output on it’s ethernet ports Product key features: Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unitThe RB260G have five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch ChipThe devices are running an operating system designed specifically for MikroTik Switch products - SwOS Download More Details
View ProductProduct introduction: Incorporating innovative industrial design with advanced technology, the LTU LR is a Point-to-MultiPoint (PtMP) 5 GHz Radio with an integrated antenna designed for use as a PtMP CPE. LTU technology that breaks through the limitations of 802.11 Wi-Fi technology and supports 1024QAM for high performance and flexible bandwidth (10/20/30/40/50 MHz). Product Highlights: Auto Power Adjustments - By default, the Auto Output Power option allows the LTU LR to set the output power (EIRP) to the appropriate level.Signal Control - The LTU LR's TX output power is controlled by the AP's target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation.Convenient Configuration - To manage the LTU LR, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System (UNMS™). Either option lets you manually configure the LTU LR. Product key features: PtMP CPE1024 QAM10/20/30/40/50 MHz channel bandwidthCentral configuration management from AP sideFrequency splitAuto power adjustmentsRouter mode supportRange up to 30kmFunctions in a PtMP environment with the LTU-Rocket as the basestation. Download More Details
View Product
Product introduction: Featuring a powerful internal antenna, the LTU Lite 5 GHz PtMP Subscriber Station & Client Radio from Ubiquiti Networks is a Customer Premises Equipment (CPE) device that's built to work in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the BaseStation. It uses Ubiquiti's proprietary LTU technology to provide fast and reliable 802.11 Wi-Fi connections that can transfer over 600 Mb/s over the 5 GHz signal band. The LTU Lite supports both bridged and built-in NAT router modes to suit your deployment. You can also individually configure the TX and RX frequencies to avoid local interference. Made from UV stabilized plastic, the LTU Lite may be installed outdoors using the included wall and pole mounts, connecting to the client's switch or router through its Gigabit Ethernet port with the included PoE injector placed in between to provide power. Product Highlights: Reliable Connectivity - The LTU Lite PtMP CPE features a powerful internal 13 dBi antenna that delivers reliable 802.11 Wi-Fi connections to LTU Rocket BaseStations.LTU Technology - Ubiquiti's LTU technology is designed to overcome the limitations of the 802.11 Wi-Fi standard by using a custom processor and radio architecture to deliver over 600 Mb/s throughput and modulation rates of up to 4096 QAM.Independent TX & RX Configurations - The TX and RX channels may be individually configured to the 10, 20, 30, 40, and 50 MHz frequencies to avoid interference.Signal Control - The LTU Lite's target TX output power controls each station's TX output power. A PtMP network can manage signal levels to enhance network stability and wireless performance with the highest possible modulation.Auto Power Adjustments - The Auto Output Power option allows the LTU Lite to set the output power (EIRP) to the appropriate level.Convenient Mounting Options - Quickly mount the LTU Lite onto a pole or wall using the included kits. Product key features: For LTU Rocket BaseStationPoint-to-MultiPoint (PtMP) DeviceCustomer Premises Equipment (CPE)Supports 802.11 Wi-Fi5 GHz (Single-Band)1 x 13 dBi Internal Antenna1 x PoE-Compliant Gigabit Ethernet PortLTU TechnologyIncludes PoE InjectorOutdoor Pole & Wall Mount Kits Included. Download More Details
View Product
Product introduction: The NanoStation locoM5 Indoor/Outdoor airMAX CPE from Ubiquiti Networks is a cost-effective and reliable solution for high performance. It features up to 10km of range performance, 25+Mb/s of throughput performance, an intuitive AirOS by Ubiquiti. The NanoStation Loco also features broadband wireless CPE technology. NanoStation5 Loco exhibits optimal antenna performance. NanoStation5 Loco maintains 13dBi of dual-polarity antenna gain in a compact form-factor using an efficient and innovative patch array antenna design. Product Highlights: Atheros SOC, MIPS 4KC, 180 MHz Processor16MB SDRAM, 4MB Flash Memory1 x 10/100 BASE-TX Ethernet Interface13dBi AntennaOver 16404' RangeAirOS SoftwareFCC Part 15.247, IC RS210 ApprovedRoHS Compliant. Download More Details
View Product
Product introduction: The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS. Product Highlights: 5x Gigabit PoE out Ethernet Smart Switch, SFP cage, plastic case, SwOS Product key features: Mikrotik Cloud Smart Switch 106-1G-4P-1SMikrotik CSS106-1G-4P-1S 5-port Gigabit Smart Switch PoE one SFP cageMikrotik SOHO switch, which features power output on it is ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only)RB260GSP has 5 Gigabit ports and one SFP cage, switching is done by an Atheros Switch ChipThe device is running an operating system designed specifically for MikroTik Switch products - SwOS Download More Details
View Product
Product introduction: The NanoStation locoM2 Indoor/Outdoor airMAX CPE from Ubiquiti Networks is a cost-effective and reliable solution for high performance. It features up to 10km of range performance, 25+Mb/s of throughput performance, an intuitive AirOS by Ubiquiti. The NanoStation Loco also features broadband wireless CPE technology. NanoStation5 Loco exhibits optimal antenna performance. Product Highlights: Atheros MIPS 4KC, 180 MHz Processor16MB SDRAM, 4MB Flash Memory1 x 10/100 BASE-TX Ethernet Interface8dBi AntennaOver 16404' RangeAirOS SoftwareFCC Part 15.247, IC RS210 ApprovedRoHS Compliant Product key features: Processor Specs: Atheros MIPS 24KC, 400MHzMemory Information: 32MB SDRAM, 8MB FlashNetworking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfacePower Supply: 24V, 0.5A POE150+ Mbps real outdoor throughput and up to 15km+ range. Download More Details
View Product
Product introduction: If you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional, and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps Product Highlights: The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environmentsThis powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices Product key features: All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setupsThe total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 MppsWe have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management Download More Details
View Product
Product introduction: Classic NanoStation design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UNMS mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE). Product Highlights: Sleek Industrial Design - The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.Improved Surge Protection - The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events.Now with airOS8 - airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. Product key features: Wireless access pointAirMax acAirMax ac5 GHz (pack of 5). Download More Details
View Product
Product introduction: Mikrotik CRS328-24P-4S+RM 24 Product Highlights: Mikrotik CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included) Product key features: CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-inThe device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you chooseIt has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS Download More Details
View Product
Category Specification Mechanical Dimensions 179 x 77.5 x 59.1 mm (7.1 x 3.1 x 2.3") Weight 180 g (6.4 oz) Enclosure Material UV-stabilized plastic Mounting Pole mounting kit (Included) Hardware Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24V, 0.3A gigabit PoE supply (Not included) Supported Voltage Range 22–27V DC Max. Power Consumption 7W LEDs Power, Ethernet, (4) Signal Strength Ambient Operating Temperature -40 to 70°C (-40 to 158°F) Ambient Operating Humidity 5 to 95% noncondensing Certifications CE, FCC, IC System Gain 13 dBi Channel Bandwidths 10/20/30/40/50/60/80 MHz Cross-Pol Isolation 20 dB min. Max. VSWR 1.8:1 Beamwidth 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Polarization Dual linear Operating Frequency (MHz) Worldwide 5150-5875 MHz USA - U-NII-1 5150-5250 MHz USA - U-NII-2A 5250-5350 MHz USA - U-NII-2C 5240-5725 MHz USA - U-NII-3 5725-5850 MHz Management Radio (MHz) Worldwide 2412 - 2472 MHz US/CA 2412 - 2462 MHz Custom Media Sizes 76.2 x 127 to 215.9 x 355.6 mm Borderless Printing Yes (up to 8.5 x 11 in, 210 x 297 mm) Recommended Media Weight 75 g/m² File Formats Supported (Scan) BMP, PDF, JPG, PNG, TIF Scanner Type Flatbed only Enhanced Scanning Resolution Up to 1200 dpi Optical Scan Resolution Up to 1200 dpi Hardware Scan Resolution Up to 1200 x 1200 dpi Maximum Scan Size 216 x 297 mm Scan Technology Contact Image Sensor (CIS) Copy Speed (Black - ISO) Up to 10 cpm Copy Speed (Color - ISO) Up to 2 cpm Copy Resolution (Black & Color Text/Graphics) Up to 600 dpi Maximum Copies Up to 99 copies Copy Settings Number of Copies, Resize, Quality, Lighter/Darker, Paper Size, Paper Type, ID Copy, Enhancement Power Consumption 0.12W (manual-off), 3.12W (ready), 0.75W (sleep) Power Requirements Input voltage: 220 to 240 VAC (+/- 10%), 50/60 Hz (+/- 3 Hz) Operating Humidity Range 15% to 80% RH (non-condensing) Recommended Humidity Range 20% to 80% RH Non-Operating Humidity Range 5% to 90% RH (non-condensing) Operating Temperature Range 5°C to 40°C Typical Electricity Consumption (TEC) 0.13 kWh/Week Energy Saving Features HP Auto-Off Technology Ecolabels Conforms to ecolabel energy efficiency limits Safety Standards IEC 60950-1 & IEC 62368-1 compliant; EU LVD and EN 60950 & EN 62368 compliant; UL GS approved; Russia EAC Security Management No Dimensions (W x D x H) 447 x 373 x 158 mm Maximum Dimensions (W x D x H) 449 x 605.65 x 258.7 mm Weight 5.14 kg What's in the Box Printer, HP GT53XL Black Ink (3), HP GT52 Ink (Cyan, Magenta, Yellow), Power Cord, Setup Guide, Flyers Replacement Cartridges HP GT53 (90ml & 135ml Black), HP GT52 Cyan, Magenta, Yellow Warranty One year standard or 30,000 pages limited warranty (up to 3 years extended warranty on registration)
View Product